Keys At Right Monitor Rear; Monitor Front - Santec SLS-1900 Bedienungsanleitung

Bedienungsanleitung / User Manual
SLS-1900, SLS-2150, SLS-3200

1.2 Keys at right monitor rear

SOURCE
If – for some reason – the remote control cannot be used or is not available, you can
alternatively adjust the settings using the keys on the right side of the monitor rear (also see
chapter 5 for further explanations on the remote control).
Power:
Press the Power key to switch the monitor on and off.
Monitor SLS-3200 has an additional main power switch.
Source:
Press the Source key to call-up the available video input signals (VGA, HDMI, AV1, AV2,
S-Video). Confirm your selection by pressing the + key.
Menu:
OSD menu:
Press the Menu key to call-up the OSD main menu of the monitor. If you are in the OSD
menu, this key serves to return to the previous menu item or to exit the OSD menu.
Keylock:
Press the menu button for approx. 3 sec. to activate the keylock function. Press the menu
button again for approx. 3 sec. to deactivate the keylock again.
+ Plus key:
Function 1: Set the volume. Pressing the + key will increase the volume.
Function 2: If you are in the OSD menu, the + key has the same function as the right
arrow key on the remote control. You can use it to navigate through the OSD menu.
- Minus key:
Function 1: Set the volume. Pressing the – key will decrease the volume.
Function 2: If you are in the OSD menu, the - key has the same function as the left
arrow key on the remote control. You can use it to navigate through the OSD menu.

1.3 Monitor front

In the lower right monitor corner your will find:
Remote control signal receiver window
LED indicator: Red = Standby mode; Green = in operation; video signal is received
_________________________________________________________________________________
+
MENU
- 37 -
- POWER