clage MBH 6 Gebrauchs- Und Montageanleitung Seite 26

EN
Installation
4. Rinse the water pipes thoroughly before connecting them to the appliance.
5. Connect the water connectors with the relevant tap connectors. The water inlet is indicated
in blue on the rating plate (under the cover) and the water outlet in red.
a
b
c
e
Fig. 6: "Connecting the water pipes"
6. Make sure that the water pipes do not apply any kind of mechanical pressure on the instan-
taneous water heater.
7. Open the hot water valve of the tap and check all connections for leaks.
a. Seal
b. Filter
c. Cold water connection (inlet)
d. Hot water connection (outlet)
a
e. Rating plate cover
d
26