Maintenance And; Technical Data - OEG SZ Series Bedienungsanleitung

14
Single motor suction pumps – SE series | Dual motor suction pumps – SZ series
8.0 Maintenance and service
9.0

Technical data

OEG – the safest link between tank and burner
GB
The filter insert and the O-ring of the filter cup should be replaced at least once a year.
In the event of extreme conditions replace them more frequently. Only use inserts with
the same filter fineness.
In the event of replacing parts, please use original OEG spare parts, otherwise we cannot
guarantee trouble-free operation and damage may occur.
Pump type Electrical connection
SE60 / SZ 60 230 V Safety plug
SE120 / SZ120 230 V Safety plug
SE200 / SZ200 230 V Safety plug
SE320 / SZ320 230 V Safety plug
SE600 / SZ600 400 V CEE, 16 A
SE1200 / SZ1200 400 V CEE, 16 A
Medium: EL heating oil
EL heating oil – low on sulphur
Other media on request
Dimensions: SE60 – SE120:
SE200 – SE1200: 700 x 400 x 730 mm (L x W x H)
SZ60 – SZ1200:
Motor: SE60 / SE120 / SZ60 / SZ120:
SE200 – SE320 / SZ200 – SZ320:
SE600 – SE1200 / SZ600 – SZ1200: 0.37 kW, 400 V, 0.95 A,
Degree of
protection: : IP54
Power
connection – connection –
Suction side Burner side
3/8"
3/8"
3/8"
3/4"
3/4"
3/4"
415 x 280 x 600 mm (L x W x H)
700 x 400 x 730 mm (L x W x H)
0.09 kW, 230 V, 0.82 A,
2800 rev/min
0.25 kW, 230 V, 2.00 A,
2800 rev/min
2800 rev/min
Power Weight
in kg
3/8" 28.0
3/8" 28.5
3/4" 56/66
3/4" 58/70
3/4" 58/70
3/4" 58/70