JVC TK-C9510E Bedienungsanleitung Seite 12

Introduction
Operating Precautions (Continued)
Disclaimer
Motion detection is not a feature to prevent theft or fire. We do not
accept liability for any damages that may occur.
We will not be responsible for any inconveniences or disturbances
caused in the event of privacy invasion as a result of camera
footages of this product.
Others
When this camera is moved from a cold to warm place, condensation
may occur and the camera may not work. In this case, leave the camera
under room temperature for about one hour before turning on the power.
When the power supply voltage is momentarily disrupted or drops
due to lightning, turning on the air-conditioner or the like, image
distortion or noise may occur.
When the power supply voltage of the camera drops, the input
protection circuit inside the camera operates, and the camera may be
turned off. Make use of a voltage rating within
camera's power supply voltage.
Do not direct the lens toward a strong light source, such as the sun.
This will result in a malfunction.
Before mounting the camera to the mounting location, attach the lens
to be used on the camera and check the back focus.
When shooting an extremely bright object (e.g. lamp), the image on
the screen may have white vertical tailings (smear) or expansion
(blooming) may appear around it. This is a characteristic of the CCD
and not a malfunction.
When this camera is used under high temperatures, vertical stripes
may appear on the screen. This is a characteristic of the CCD and
not a malfunction.
When using this camera with [AGC] set to "MID" or "HIGH", the
sensitivity increases automatically for dark images and the screen
may appear grainy. This is not a malfunction.
When [DAY/NIGHT] is set to "AUTO", the camera switches to the
B&W (black-and-white) mode in a dark location. As the sensitivity
level is increased in this case, the screen may appear grainy and
more white spots may appear. When switching between modes, the
brighter area on the screen is emphasized and visibility may be
reduced. This is not a malfunction.
E-12
10 % for the