OBJ_BUCH-623-004.book Page 27 Wednesday, September 7, 2011 12:03 PM
Do not operate the battery charger on easily inflammable surfaces
(e. g., paper, textiles, etc.) or surroundings. The heating of the bat-
tery charger during the charging process can pose a fire hazard.
Supervise children. This will ensure that children do not play with the
charger.
Children or persons that owing to their physical, sensory or mental
limitations or to their lack of experience or knowledge, are not ca-
pable of securely operating the charger, may only use this charger
under supervision or after having been instructed by a responsible
person. Otherwise, there is danger of operating errors and injuries.
Products sold in GB only: Your product is fitted with an BS 1363/A ap-
proved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service
agent. The replacement plug should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to avoid a possible shock hazard
and should never be inserted into a mains socket elsewhere.
Product Description and Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws as well as for
drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustration of the
machine on the graphics page.
1 Screwdriver bit*
2 Keyless chuck
3 Torque preselection ring
4 Indicator for right rotation
Bosch Power Tools
English | 27
2 609 005 642 | (7.9.11)