Declaration Of Conformity - Bosch PSR 10,8 LI Originalbetriebsanleitung

OBJ_BUCH-623-004.book Page 30 Wednesday, September 7, 2011 12:03 PM
30 | English

Declaration of Conformity

We declare under our sole responsibility that the product described un-
der "Technical Data" is in conformity with the following standards or
standardization documents: EN 60745 (battery powered products) and
EN 60335 (battery chargers) according to the provisions of the directives
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
08
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Engineering Director
Engineering PT/ESI
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
01.09.2011
Assembly
Battery Charging (see figure A)
Do not use other battery chargers. The supplied battery charger is
designed for the Lithium-Ion battery in your machine.
Observe the mains voltage! The voltage of the power supply must
correspond with the data given on the nameplate of the battery charg-
er. Battery chargers marked with 230 V can also be operated with
220 V.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its
service life. Interrupting the charging procedure does not damage the bat-
tery.
2 609 005 642 | (7.9.11) Bosch Power Tools