Bosch PSR 10,8 LI Originalbetriebsanleitung Seite 31

OBJ_BUCH-623-004.book Page 31 Wednesday, September 7, 2011 12:03 PM
The lithium-ion battery is protected against deep discharging by the "Elec-
tronic Cell Protection (ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer
rotates.
Do not continue to press the On/Off switch after
WARNING
the machine has been automatically switched
off. The battery can be damaged.
The charging procedure starts as soon as the main plug of the battery
charger is inserted into the socket and the cordless screwdriver is after-
wards placed on the battery charger 11.
The battery charge-control indicator 5 indicates the charging progress.
During the charging procedure, the indicator flashes green. The battery
is fully charged when the indicator lights up green continuously.
During the charging procedure, the handle of the machine warms up. This
is normal.
Disconnect the battery charger from the mains supply when not using it
for longer periods.
The power tool cannot be used during the charge procedure; it is not de-
fective when inoperative during the charging procedure.
Observe the notes for disposal.
Changing the Tool (see figure B)
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
The drill spindle is locked when the On/Off switch 9 is not pressed. This
makes quick, convenient and easy changing of the tool in the drill chuck
possible.
Open the keyless chuck 2 by turning in rotation direction
can be inserted. Insert the tool.
Firmly tighten the collar of the keyless chuck 2 by hand in rotation direc-
tion until the locking action ("click") is heard. This automatically locks
the chuck.
The locking is released again to remove the tool when the collar is turned
in the opposite direction.
Bosch Power Tools
English | 31
, until the tool
2 609 005 642 | (7.9.11)