Herunterladen Inhalt Inhalt Diese Seite drucken

Zusätzliche Erklärungen Für Wireless-Produkte - HP CP1020 Benutzerhandbuch

Laserjet professional
Vorschau ausblenden Andere Handbücher für CP1020:
Inhaltsverzeichnis

Werbung

Zusätzliche Erklärungen für Wireless-Produkte
FCC-Konformitätserklärung für die USA
Exposure to radio frequency radiation
ACHTUNG:
Nevertheless, the device shall be used in such a manner that the potential for human contact during normal
operation is minimized.
In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the
antenna shall not be less than 20 cm during normal operation.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
ACHTUNG:
product without the express approval by HP may invalidate its authorized use.
Erklärung für Australien
This device incorporates a radio-transmitting (wireless) device. For protection against radio transmission
exposure, it is recommended that this device be operated no less than 20 cm from the head, neck, or body.
ANATEL-Erklärung für Brasilien
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário.
Erklärungen für Kanada
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the radio interference regulations of the Canadian Department of
Communications. The internal wireless radio complies with RSS 210 of Industry Canada.
Pour l´usage d´intérieur. Le présent appareil numérique n´émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de Classe B prescribes dans le règlement sur le brouillage
radioélectrique édicté par le Ministère des Communications du Canada. Le composant RF interne est
conforme à la norme CNR-210 d´Industrie Canada.
Strahlenbelastung durch Funkfrequenz (Kanada)
VORSICHT!
liegt unter den Grenzwerten für Funkfrequenz von Industry Canada. Dennoch sollte dieses Gerät so
eingesetzt werden, dass während des normalen Betriebs nur minimaler Kontakt mit den Benutzern entsteht.
Um zu verhindern, dass die Grenzwerte für Funkfrequenz von Industry Canada überschritten werden, sollten
sich die Benutzer immer mindesten 20 cm von den Antennen entfernt aufhalten.
DEWW
The radiated output power of this device is far below the FCC radio frequency exposure limits.
Based on Section 15.21 of the FCC rules, changes of modifications to the operation of this
Strahlenbelastung durch Funkfrequenz. Die von diesem Gerät ausgestrahlte Ausgangsleistung
Zusätzliche Erklärungen für Wireless-Produkte 171

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis