Dry Ironing; Spray Function; Anti-Drip System - Termozeta Milordino Gebrauchsanweisung

ENGLISH
NOTE
• Steam is discharged only if knob (8) was set to symbols
MAX.
• When the iron is placed vertically during ironing pauses, the steam
supply is automatically cut off.
• Some water drops can come out together with the steam on first
use. This is to be considered normal. Before ironing your linen carry
out some tests on an old cloth.

DRY IRONING

• Set the steam control dial (4) to the "0" position (dry ironing).

SPRAY FUNCTION

• This function allows moistening the linen during both steam and dry
ironing.
• To enable it press the spray button (10) several times and direct the
water jet onto the most resistant creases.
SUPER-STEAM FUNCTION
• Press the super-steam button (4) several times: the iron will supply
an instantaneous high power steam jet.
NOTE
• Do not press button (4) too many times consecutively, as this may
cause non-steamed water drops to be discharged.
• Use this function only with the temperature control knob (8) set to
symbols
• When the super-steam function is used for the first time some
limestone pieces could come out. We therefore advise you not to
discharge the first steam jets directly onto the linen.

ANTI-DRIP SYSTEM

This system prevents the iron from dripping onto the linen. The device
is automatically enabled if, for whatever reason, the temperature of
the soleplate lowers.
, MAX.
,