Charging Batteries; Battery Charge Level - UCOM Twintalker 4710 Bedienungsanleitung

UCOM Twintalker 4710 DCP

10 Charging batteries

The device can also operate with 3 x AAA NiMh batteries or with 3 x AAA
Alkaline batteries.
3 x AAA batteries cannot be charged with the charger.

11 Battery Charge Level

The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the
BATTERY icon on the LCD Display.
When the battery charge level is low, a beep will be heard.
8
When NiMh battery packs are installed, the desktop
charger provides drop-in charging conveniency
1.
2.
3.
4.
It will take about 12 to 14 hours to fully charge the bat-
teries. There is no indication on the display when the
batteries are being charged.
• Battery Full
+ +
• Battery 2/3 charged
+ +
• Battery 1/3 charged
+ +
• Battery empty
+ +
Put the desktop charger on a flat surface.
Plug the supplied adapter into the electric
socket. Pay attention to the mentioned voltage
and compare this with the indications of the
power supply. Connect the low tension plug at
the end of the cable with the connector
the backside of the desktop charger.
Put the PMR in the charger as indicated.
The charging LED will turn on if it's properly
inserted and charging.
31
UCOM Twintalker 4710 DCP
on