Automatic Power Off (Apo); Key Tone On/Off; Chronometer - UCOM Twintalker 4710 Bedienungsanleitung

14.14 Automatic Power Off (APO)

To save energy, you can activate the Automatic Power Off function. In case you forgot to
Power Off the unit, it will switch Off automatically after the set time.

14.15 Key Tone On/Off

When a button is pressed, the unit will beep briefly.

14.16 Chronometer

The Twintalker 4710 has a chronometer function (mm:ss).
After selecting this function, and also after resetting the counter, the
measurement should be started within 5 seconds. If not, the device shall
return to stand-by.
UCOM Twintalker 4710 DCP
• Press the - button
time flashes on the display.
• Press the - button
another time (1 - 12 hour). Select 'OF' to disable the APO
feature.
• Press the PTT - button
mode.
• Press the - button
setting flashed on the display.
• Press the - button
disable (OF) the Key Tone.
• Press the PTT - button
mode.
• Press the - button
• Press the - button
• Press the - button
time. The counter continues in the background. Press the
button 11 to proceed counting.
• When the counter is stopped, press the
the counter.
5
eight times, the current Power OFF
11 or the - button
13 to confirm and return to stand-by
5
nine times, the current Key Tone
11 or the - button
13 to confirm and return to stand-by
5
ten times. The counter is displayed.
11 to start counting.
11 again to stop counting and see the lap
UCOM Twintalker 4710 DCP
6
to change to
6
to enable (ON) or
-
6
- button to reset
15