Inhaltsverzeichnis
Werbung
CD Mode with "GRUNDIG CD Changer"*
Selecting the CD changer programme
Selecting or repeating a track
source
Briefly (repeatedly) press the button until the
"
number of the desired track is shown in the
SOURCE
Repeatedly press the
button until the
display.
display indicates "MC01".
"
(TRACK + ) button: go to next track.
1
"
(TRACK – ) button: go to previous track or
4
Switching the display
repeat current track.
"
Briefly press the
2
(DISPLAY)button.
Fast forward and reverse
"CD 1 TO1":
1st CD - 1st track, or
To listen to tracks in "Quick preview" at
"TO1 O1: 15":
1st track - playing time of 1st
reduced volume:
track.
Forward Press and hold down the
Rewind: Press and hold down the
Selecting a CD
Playing the 1st track on every CD
"
Briefly (repeatedly) press the
(DISK + ) or
3
for approx. 10 seconds (CD SCAN)
"
(DISK – ) button until the number of the
6
desired CD appears in the display.
"
(DISK + ) button until the signal
Press the
3
sounds:
CD pause
"CD SCAN" appears briefly in the display.
If the played track is to be retained:
"
Press the
( ) button.
5
"
(DISK + ) button until the signal
The display indicates ""CD Pause".
Press the
3
sounds:
Press the button again to continue play.
"RESET" appears briefly in the display.
EXPERT Settings
3. Activating the setting
EXPERT control level
"
LOUD
Briefly press the
EXPERT
A great number of possible settings
"
" appears in the display
E
("
" = entry).
To make car radio operation as easy as possi-
E
ble, numerous settings that you need only
RDS – – – TP AF LOUD MONO
once or occasionally are located in an additio-
nal control level (EXPERT).
DX
LCD88825
E
Setting
4. Changing the setting
1. Activating the EXPERT function
"
LOUD
Set the desired contrast using the
Press the
button until the signal
EXPERT
"
+ button. The display indicates, for
sounds.
example:
2. Selecting settings
RDS – – – TP AF LOUD MONO
Select from
1
ß?
Possible settings
...
DX
LCD88853
E
the setting you wish to check or alter.
Example:
1
5. Ending the setting
Change display contrast
LCD 25
"
LOUD
Briefly press the
EXPERT
"
" disappears from the display.
E
"
"
+ button until the
Press the
– or
6. Selecting the next setting
desired setting "LCD 25" appears in the
(repeat the steps 2 to 5)
display.
7. Deactivating EXPERT
"
LOUD
Press the
button until the signal
EXPERT
sounds.
Playing the tracks on a CD in random
order (TRACK RANDOM)
"
(TRACK – ) button until the
Press the
4
signal sounds:
"TR RND" appears briefly in the display.
Terminate:
"
Press the
(TRACK – ) button until the
4
signal sounds:
"RESET" appears briefly in the display.
Playing the tracks on a CD for approx.
>
button.
10 seconds (TRACK SCAN)
<
button.
"
(TRACK + ) button until the
Press the
1
signal sounds:
"TR SCAN" appears briefly in the display.
Terminate:
"
Press the
(TRACK + ) button until the
1
signal sounds:
"RESET" appears briefly in the display.
*Your specialised dealer can inform you
which Grundig CD changer is suitable.
1
ß?
Possible settings
...
button:
Indication in the display: "......"
1
Change display contrast
CR
"LCD 25" (00 ... 63). Set according to the
location of the car radio so that the
display can optimally be read off.
2
Security LED (on/off)
"BLK ON" The security LED is flashing when
"
– or
the radio is switched off and the
ignition is switched on.
"BLK OFF" The security LED does not flash.
3
CR
Sound signal (on/off)
"BEEP ON" Sound signal as function ack-
nowledgement.
"BEEP OFF" Function acknowledgement by
brief muting.
4
Autom. LEARN (radio mode)
button:
If you are in a reception area in which
reception of RDS programmes with traffic
announcements is poor, you can disable
the "Autom. LEARN (LRN) in radio mode"
function so that these RDS programmes
can still be received.
CD Mode with "GRUNDIG CD Changer"
Playing CD's in random order
Ending CD mode
(CD RANDOM)
"
SOURCE
Briefly press the
"
(DISC – ) button until the signal
another programme source.
Press the
6
í
sounds:
"CD RND" appears briefly in the display.
On multimedia CDs, data tracks are recorded
Terminate:
in addition to the sound tracks. If you play
"
Press the
(DISC – ) button until the signal
6
such a CD despite of the warning message,
sounds:
noise may be generated in a volume which
"RESET" appears briefly in the display.
can endanger traffic. In addition, the receiver's
output stages and the loudspeakers may be
damaged.
Enabling traffic announcements
during CD play
Activating TP
¡
Briefly press the
TP/AF
button.
"TP" appears in the display.
"
SOURCE
De-activating TP
¡
Briefly press the
TP/AF
button.
"TP" disappears from the display.
"LRN ON": autom. LEARN
7
CD or AUX input sensitivity
"LRN OFF": no autom. LEARN for volume set-
Adapting a CD changer of an AUX audio
tings greater than "VOL 4".
programme source.
In the "TP reception only" mode (volume tur-
"MCD LOW" low
"MCD MID" median
ned down), the LEARN function is always
activated to ensure reception of traffic anoun-
"MCD HIGH" high (e.g. MCD 30)
cements.
8
Volume limitation when switching on
5
Autom. change of regional programme
"ON VOL - -": no limitation or
"ON VOL 20": max. volume, e.g. 20
If an RDS programme consists of various
(- - ... 40).
regional programmes, it may occur that
The volume is limited only if the volume
your car radio changes between regional
when the car radio is switched off is
stations when changing the reception area.
greater than the set value!
"REG ON" autom. change of regional
9
programme is possible.
Minimum volume for traffic
"REG OFF" no change of regional
announcements
programme is possible.
"TA VOL 16" (10 ... 40)
6
You hear the set volume while making the
Switching on and off with the
setting.
ignition/start switch
ßI
"IGN ON" It is possible to switch the radio on
Speed-controlled volume
and off with the ignition/start
"SCVOL 124" (- - ... 144)
switch of the vehicle.
Setting is only possible if a speed-control-
"IGN OFF" Switching on and off with the igni-
led signal is present on the SCV connection
tion/start switch of the vehicle is
(A1).
not possible.
" SCVOL - - " : SCV switched off.
" SCVOL 144 " : maximum effect.
External CD or DAT Mode
Connecting a CD or DAT player
button to select
CD = Compact Disc (without CD changer)
DAT = Digital Audio Tape
If you have not connected a GRUNDIG CD
changer, you can also connect other CD
players of DAT players via a suited connecting
cable to the car radio (connect contact C 13 to
earth contact C 15).
Activating CD or DAT mode
(AUX mode)
Selecting the CD or DAT programme source:
"
SOURCE
Repeatedly press the
button until
"AUX" appears in the display.
¡
TP/AF
"
"
–
1
6
EXPERT Settings
í
For reasons of safety, the following
setting should be carried out by the
passenger!
Setting
1. Car standing still, motor running:
"
"
+
set desired volume with the
– or
button.
2. Prepare EXPERT setting:
"
LOUD
press the
button until signal
EXPERT
sounds.
"
"
Repeatedly press the
– or
+ button
until " SCVOL ..." appears in the display.
"
LOUD
Briefly press the
button:
EXPERT
»
« appears in the display.
E
3. At higher speed:
"
"
+
set desired volume with the
– or
button, e.g." SCVOL 124 " in display.
"
LOUD
Press the
button until the signal
EXPERT
sounds.
ß?
Activating the coding (for detailed infor-
mation see the chapter "Coding").
If "CODE" appears in the diplay, coding is
not activated.
If "SAFE" appears in the display, coding is
activated.
Werbung
Inhaltsverzeichnis
