Inhaltsverzeichnis
Werbung
– "
Memory position buttons
"
Alternative frequencies (AF)
1
6
The display indicates "AF"
Select range: U I, U II or U III,
MW or LW.
You are receiving an RDS programme that
is being broadcast by several stations with
Setting the station/RDS programme:
different frequencies.
If the station/RDS programme tuned to is
already stored in the selected range on a pro-
Your car radio always selects automatically
gramme position button, for example, "U I",
the station with the alternative frequency
the corresponding number is indicated on the
giving the best reception quality.
display.
Storing the set station/RDS programme:
Press the programme position button until the
signal sounds.
If "AF" is switched off, this setting is also
stored in memory.
Calling up stored stations/RDS programmes:
Press the programme position button briefly.
The contents of the memory position buttons
are preserved even if the car radio is dis-
connected from the operating voltage.
"
–
PTY programme buttons
PTY function
The memory position buttons
1. Activating the PTY function
"
PTY
are assigned to the following programme
Press the
button briefly:
DX
types:
the last selected programme type is shown
"
"
"
1
NEWS,
2
SPORT,
3
POP
in the display.
"
(with M.O.R.M)
ROCK and
4
2. Set the desired programme type ...
"
5
CLASSICS (with LIGHT M).
– with the PTY programme buttons
The memory position button
NEWS, SPORT, POP, ROCK CLASSICS or
"
PERS
PERS (personal) can be assigned to a
6
programme type of your choice.
Press the respective button briefly:
the PTY search starts automatically and
1. Switch on the PTY function:
"
PTY
moves to the next station offering the pro-
Briefly press the
button.
DX
gramme type selected. The display shows
<
>
2. Repeatedly press the
or
button until
"PTY ..."
the desired programme type is shown in
– or –
the display.
"
"
3. Press the
6
button until the signal
SOURCE
sounds.
"
"
+
–
Radio
Switching off the AF function
When you are in an area with very poor recep-
tion conditions it may happen that short pau-
ses occur while the radio is searching for the
alternative frequencies. It is best in this case
to switch the AF function off.
¡
Press the
TP/AF
button until the signal
sounds.
The "AF" function is switched off.
Reactivating the AF function
¡
Press the
button until the signal
TP/AF
sounds. This is only possible with stations
broadcasting with alternative frequencies.
¡
TP/AF
"
"
"
+
1
–
6
Radio
<
>
Briefly press the
or
button until the
desired programame type is hown in the
display.
<
>
Press the
or
button until the signal
sounds:
The PTY search moves to the next station
offering the selected programme type and
the programme type, for example, "POP" is
shown.
If no station is offering the selected pro-
gramme type, you will hear the station last
tuned to and the PTY function is de-activa-
ted.
3. Deactivating the PTY function
"
PTY
Briefly press the
button, or
DX
automatically after approx. 6 seconds.
¡
TP/AF
"
"
"
PTY
1
–
6
DX
To abort a traffic announcement
Traffic announcement standby (TP)
¡
briefly press the
TP/AF
button.
TP (TRAFFIC PROGRAM) =
Station broadcasting traffic announcements.
If the TP station tuned to can no longer be
The radio is in traffic announcement standby
received, the radio will automatically tune to a
if the display indicates "TP".
receivable TP station.
"LRN ..." appears in the display.
Switching TP on/off:
¡
Briefly press the
button.
TP/AF
Programme types (PTY)
If the station tuned to is no TP station, the
radio starts automatically a search for the
Prerequisite
next TP station.
The radio station tuned to must offer the "Pro-
Traffic announcements always begin with a
gramme types" service PTY in the VHF range
certain minimum volume:
(U I, U II or U III).
It is possible to set this minimum volume
Programme types
when you are in the expert control level.
The programme types a radio station offers
During the announcement you can change the
change according to the programme being
"
"
+ button.
volume using the
– or
broadcast.
You will hear only traffic announcements
NEWS
News and current events
"
if you set the volume to "zero" using the
–
AFFAIRS
Politics and current affairs
button.
INFO
Special talk programme
CD or CD changer play is interrupted
SPORT
Sport programme
during the traffic announcement.
EDUCATE Learning and continuing
education
DRAMA
Radio plays and literature
CD Mode
Selecting the CD programme source
Fast forward and reverse
Insert a CD into the CD compartment.
To listen to tracks in "Quick preview" at
reduced volume:
The display indicates "T01 00:00" – or –
Forward Press and hold down the
a CD is in the CD compartment:
Rewind: Press and hold down the
"
SOURCE
Repeatedly press the
button until the
display indicates "CD".
Playing the tracks on a CD for approx.
If the CD is not completely pulled in, the dis-
10 seconds (TRACK SCAN)
play will indicate "NO CD".
"
(TRACK + ) button until the
You can exit this condition by inserting the CD
Press the
1
"
SOURCE
once again or by pressing the
button.
signal sounds:
í
"TR SCAN" appears briefly in the display.
Terminate:
Attention with automatic aerials!
"
Briefly press the
(TRACK + ) button:
1
The radio switches automatically on as soon
"RESET" appears briefly in the display.
as you insert a CD.
This causes also the aerial to be extended!
See also the note on page 3!
Playing the tracks on a CD in random
order (TRACK RANDOM)
Selecting or repeating a track
"
(TRACK – ) button until the
Press the
4
signal sounds:
Briefly (repeatedly) press the button until the
"TR RND" appears briefly in the display.
number of the desired track is shown in the
display.
Terminate:
"
(TRACK + ) button: go to next track.
1
"
(TRACK – ) button:
Briefly press the
4
"
(TRACK – ) button: go to previous track or
4
"RESET" appears briefly in the display.
repeat current track.
Radio
CULTURE Culture, church and society
SCIENCE
Science
VARIED
Talk entertainment
POP
Pop music (hits)
ROCK M
Rock music
M.O.R.M
Light music
LIGHT M
Light classical music
CLASSICS Serious classical music
OTHER M Music programmes that cannot
be categorised (e.g., Folklore)
NO PTY
No programme type identifier
CD pause
"
5
( ) button. Press to pause and press
again to continue.
>
button.
<
button.
Enabling traffic announcements
during CD play
Activating TP
¡
Briefly press the
TP/AF
button.
"TP" appears in the display.
De-activating TP
¡
Briefly press the
button.
TP/AF
"TP" disappears from the display.
Terminating CD mode
Select another sound source by briefly pres-
"
SOURCE
sing the
button or eject the CD.
Ejecting the CD
"
SOURCE
Press the
button until the signal
sounds. The CD is ejected.
If the ejected CDis not removed within 15
seconds, it is pulled in again for reasons of
safety.
Werbung
Inhaltsverzeichnis
