Storage - Silvercrest SKV 1200 A1 Bedienungsanleitung

Blade holder
Sealing ring
Blender jug
–
Turn the blender
–
Insert the blender tool
of the blender
that the two catches on the underside of the
blender / the blade holder
the recesses in the blender tool
–
Turn the blender tool
clockwise) until the blade holder
blade can be lifted out of the blender
–
Pull the sealing ring
holder with the blade
■ Now you can clean all the parts (blender jug
blade holder the blade
in warm water with a little washing up liquid
using a washing up brush. Afterwards, rinse all
the parts with clean water so that no detergent
residues remain.
NOTE
► The blender jug
the blade and the sealing ring
dishwasher-safe.
If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed. We recommend
using the top rack of the dishwasher and a
washing programme with max. 45°C.
► The blender lid
is not dishwasher-safe.
SKV 1200 A1
over.
into the underside
/ the blade holder
grip into
.
towards (anti-
with the
from the blade
.
and sealing ring
, the blade holder with
are all
with the measuring cup
■ After cleaning, reassemble the blender:
–
Push the sealing ring
on the blade holder
–
Place the blade holder
back into the blender jug
blade
so
–
Insert the blender tool
of the blender
that the two catches on the underside of the
blender
the recesses in the blender tool
–
Turn the blender tool
.
wise), so that the blade holder
blade
,
In most cases, you can achieve sufficiently hygienic
)
cleaning of the blender
the following way:
1) Put some water containing a little detergent
into the fully assembled blender
2) Place the blender lid
in position so that the lips of the blender lid
also seal the spout.
3) Switch on the blender
4) Pour out the washing water. Any residues can
be removed with a washing-up brush.
5) Then rinse out the blender
clean water so that all detergent residues are
removed.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry location.
back into the recess
with the blade
with the blade
so that the
protrudes into the blender jug
into the underside
/ the blade holder
/ the blade holder
towards
sits hand-tight on the blender jug
immediately after use in
with measuring cup
for a few seconds.
with plenty of
GB │ CY
.
.
so
grip into
.
(clock-
with the
.
.
11 ■
│