Electrical Connection - RADEMACHER 3500 08 64 Betriebsanleitung

i
10.1 Electrical connection
1. Switch off the mains power and secure it to prevent any
reactivation.
2. Connect the wires in accordance with the specifications given on
the type plate and in accordance with the wiring diagram
on page 41.
Unintentional removal of the connecting cable during opera-
tion of the equipment can lead to life-threatening situations
due to electric shocks or short circuits.
Secure both connecting cables against removal with the help of the
tension relief mechanism.
3. Connect the plug and coupling for both connecting leads
with the DuoFern Connect actuator.
4. Switch the mains power back on and check that the system
is working correctly.
Removing the plug or coupling during operation of the equip-
ment can damage the drive or the DuoFern radio Connect
actuator.
Always secure the plug and coupling by engaging the corresponding
safety clip. The safety clips must fully engage.
40
EN