Using With Databases; Noah 3.7; Noah 4; Working With Otoaccess - Interacoustics Callisto Gebrauchsanweisung

Callisto™ Instructions for Use - EN

2.7 Using with databases

2.7.1 Noah 3
If you are using HIMSA'S Noah3 Office System and you want a button shortcut for the installed module,
please follow these steps.
1. Start Noah3.
2. Go to the menu item "Tools".
3. Select "Module buttons".
4. Choose one of the two available buttons and select the software name in the drop down list.
5. Press "OK" and your module will be launched when the appropriate button gets pushed.

2.7.2 Noah 4

If you are using HIMSA's Noah4 Office System,, the Callisto software will install itself automatically in the
menu bar on the Noah4 start page, along with all the other software modules.

2.7.3 Working with OtoAccess™

If you want to launch the software suite from OtoAccess™ this is also possible.
1. Start the database by clicking on the OtoAccess™ shortcut or select the OtoAccess™ from the
"Start" menu.
2. Select a patient from the list in the "Client" tab.
3. Double click on the Callisto™ Suite icon under "Select Instrument".
For further instructions about working with the database, please see the operation manual for OtoAccess™.
Page 24