Setting Ct; Usb Devices; Usb Device Playback; Display Items - Sony CDX-GT929U Bedienungsanleitung

Setting CT

1
Set "CT on" in setup (page 20).
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.

USB devices

USB device playback

1
Remove the USB cap from the USB
connector and connect the USB
device to the USB connector.
Playback starts.
If a USB device is already connected, to start
playback, press (SOURCE) repeatedly until
"USB" appears.
Press (OFF) to stop playback.
Notes
• Before removing a USB device, be sure to stop
playback first. If you remove your USB device during
playback, data in the USB device may be damaged.
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.

Display items

Example: when you set Info (information) mode
to "All" (page 20).
A
C
ATRAC/WMA/MP3/AAC indication*
A
WMA/MP3/AAC indication*
B Clock
C Folder number/Track number/Elapsed
playing time, Track name, Artist name,
Album name
*1 When an ATRAC Audio Device is connected.
*2 When a Mass Storage Class Device is connected.
continue to next page t
B
1
2
17