Manual Settings - Hama EWS Intro Bedienungsanleitung

• If the station still does not receive a signal, press and hold
the Z/Register button (23) for approximately 3 seconds to
start the manual search for the DCF signal. The DCF radio
symbol (3) begins to flash.
Note – Time settings
• The search process can take up to 10 minutes. If the
search fails, it ends and is repeated at the next clock
hour. The DCF radio symbol (3)
• In the meantime, however, you can set the time and the
date manually.
• The clock automatically continues to search for the
DCF signal on a daily basis (between 2 am and 4 am
and between 5 am and 6 am). If the signal is received
successfully, the manually set time and date are
overwritten.
Note – Summer time
The clock automatically switches to summer time.
appears on the display as long as summer time is activated.

Manual settings

• Press and hold the CLOCK button (21) for approximately 3
seconds to make the following settings one after the other:
• 12 or 24-hour format
• Weekday language (GE = German, FR = French,
ES = Spanish, IT = Italian, EN = English)
• Time zone (from -12 to +12 hours CET)
• Hour
• Minute
• Second
• Year
• Month
• Day
Press the SET/RESET button (25) to select your setting. Press
the CLOCK button (21) to confirm your entries.
goes out.
Note – Time zone
• The DCF signal can be received over long distances, but
always transmits the current Central European Time in
Germany. Make sure you account for the time difference
in countries in other time zones.
• If you are in Moscow, the time is 3 hours later than in
Germany. This means that you should set +3 for the time
zone. The clock then sets the time automatically to 3
hours ahead after receiving the DCF signal or according
to the manually set time.
Alarm
• Press and hold the ALARM button (22) for approximately
3 seconds to set the time of the alarm displayed. The hours
display begins to flash.
• Press the SET/RESET button (25) to select the hour for
the alarm time and confirm your selection by pressing the
ALARM button (22). The minutes display begins to flash.
• Repeat the process to set the minutes for the alarm time.
• Repeat the entire process to set the second alarm.
• If you do not make an entry for 25 seconds, you
automatically exit the setting mode.
• Press the ALARM button (22) once to display the first alarm
time. Press the ALARM button (22) once more to display the
second alarm time.
• Press the SET/RESET button (25) once to activate the first
alarm. Press the SET/RESET button (25) once more to
activate the second alarm. Press the SET/RESET button (25)
a third time to activate both alarms.
• An activated alarm is indicated by the respective symbol
/ on the display.
1
2
• Press the SET/RESET button (25) repeatedly to deactivate
the daily alarm. The alarm symbol
• If the alarm is triggered, the alarm symbol is displayed and
an alarm will sound.
• Press SELECT (24), SET/RESET (25), ALARM (22) or CLOCK
(21) to stop the alarm. Otherwise, it will stop automatically
after 2 minutes.
/ is not displayed.
1
2
5