C) Hdmi-Input „Hdmi-In - Renkforce 419700 Bedienungsanleitung

c) HDMI-input „HDMI-IN"
When the HDMI-input is selected and you push the button „MENU", the associated OSD menu is displayed.
The OSD menu is operated as follows:
• The buttons „t" or „u" on the IR-remote control (or „UP/+" and „DOWN/-" on the monitor) are used to
select between the submenus „PICTURE", „OSD", „FUNCTION" and „AUDIO".
• The button „q" or „p" on the IR-remote control (or „SOURCE" on the monitor) can be used to select the
functions.
• The buttons „t" or „u" on the IR-remote control (or „UP/+" and „DOWN/-" on the monitor) are used to
select the respective set values.
• If you have completed the settings, the button „MENU" will take you back to the selection of the subme-
nus „PICTURE", „OSD", „FUNCTION" and „AUDIO" .
Leave the OSD menu by pushing the button „MENU" again. Alternatively, wait without pushing a button
until the display of the OSD menu disappears on its own.
Submenu „PICTURE"
The following functions are available:
„CONTRAST"
„BRIGHTNESS"
„COLOR TEMP"
32
Contrast
Brightness
Colour temperature