D) Vga-Input „Vga-In - Renkforce 419700 Bedienungsanleitung

d) VGA-input „VGA-IN"
When the VGA-input is selected and you push the button „MENU", the associated OSD menu is displayed.
The OSD menu is operated as follows:
• The buttons „t" or „u" on the IR-remote control (or „UP/+" and „DOWN/-" on the monitor) are used to
select between the submenu „PICTURE", „OSD", „FUNCTION", „GEOMETRY" and „AUDIO".
• The button „q" or „p" on the IR-remote control (or „SOURCE" on the monitor) can be used to select the
functions.
• The buttons „t" or „u" on the IR-remote control (or „UP/+" and „DOWN/-" on the monitor) are used to
select the respective set values.
• If you have completed the settings, the button „MENU" will take you back to the selection of the subme-
nu „PICTURE", „OSD", „FUNCTION", „GEOMETRY" and „AUDIO" .
Leave the OSD menu by pushing the button „MENU" again. Alternatively, wait without pushing a button
until the display of the OSD menu disappears on its own.
Submenu „PICTURE"
The following functions are available:
„CONTRAST"
„BRIGHTNESS"
„COLOR TEMP"
Contrast
Brightness
Colour temperature (after pushing the button „u" on the IR remote control or
„UP/+" on the monitor, another submenu appears in which either one of the pre-
set colour modes „NORMAL", „WARM" or „COLD" or the user-definable colour
mode „USER", where the red, green and blue colour shares can be set manually
as desired can be selected)
35