Functional Description; Intended Use - Bosch PST 680 EL Originalbetriebsanleitung

18 | English
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS only: Use a residual cur-
rent device (RCD) with a rated residual current
of 30 mA or less.
Safety Warnings for Laser Machines
Caution – The use of other operating or
adjusting equipment or the application
of other processing methods than those
mentioned here, can lead to dangerous
radiation exposure.
1 609 929 N58 | (16.12.08)
Never make warning signs on the machine
unrecognisable.
Laser Radiation
Do not stare into beam
Class 2 laser product
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam your-
self, not even from a distance.
This power tool produces laser
class 2 laser radiation according
to EN 60825-1. Other persons
could be blinded unintentionally.
Do not use the laser viewing glasses as safe-
ty goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Do not allow children to use the power tool
without supervision. They could uninten-
tionally blind other persons.
Shut the laser beam off for stationary oper-
ation of the machine. In stationary operation
you can easily be blinded by the laser beam.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
Bosch Power Tools