Herunterladen Inhalt Inhalt Diese Seite drucken

Changing The Programme After It Has Started - Grundig Edition 70 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Edition 70:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

C
Child Lock is deactivated
when the machine is
switched off and on with
On/Off/Cancel button.
When the Child Lock is activated:
• Display symbols will not
change even if the position of
Programme Selection knob is
changed while the machine is
running or in halt.
• If the Child Lock is deactivated
after changing the position of
the Programme Selection knob
while the machine is running,
the machine stops and new
programme information is
displayed.
6.12 Changing the programme after
it has started
After the machine starts, you can
change the selected programme
and dry your laundry in a different
programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, for instance, press
the Start / Pause button for 1
second to stop the programme.
2. Select Extra Dry programme by
turning the Programme Selection
knob.
3. Press the Start/Pause button to
start the programme.
Adding / removing laundry in Pause
mode
In order to add or take out laundry
after the drying programme has
started:
1. Press Start/Pause button to
switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out
laundry and close the loading
door.
3. Press the Start/Pause button to
start the programme.
26
C
Any laundry added after
the drying process has
started may cause the
clothes that are already
dried in the machine
intermingle with wet
clothes and the result will
be wet laundry after the
drying process is over.
C
You may repeat laundry
adding or removing
process as many times
as you desire during
drying. However, this
process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then
the current programme
is aborted and new
programme information is
displayed.
CAUTION: Do not touch
the inner surface of the
drum when adding or
taking out laundry while
a programme is running.
Surfaces of the drum are
hot.

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis