Starting The Programme; Child Lock; Changing The Programme After It Has Started - Grundig GTN 37110 G Bedienungsanleitung

Operating the product
C
Additional laundry may be loaded
/ taken out during the End
period. At the end of the End Time
countdown process, End Time symbol
disappears, drying process starts and
the programme duration is displayed.
The time on the display is the total of
normal drying time and delay time.
Changing the Delay Time
If you want to change the time during
countdown:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme. Restart
the machine and repeat the
procedure for the desired time.
2. When your machine is operated for the
first time, it starts with the declaration
programme (wardrobe dryness for
cottons).
Canceling End Time function
If you want to cancel the Time Delay
countdown and start the programme
immediately:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme.
2. Press On/Off/Cancel button to start the
programme you have previously selected.

5.9 Starting the programme

Press Start/Pause button to start the
program.
Start symbol will light up to indicate that
the programme has started and ":" symbol
in the middle of the remaining time will keep
flashing.

5.10 Child Lock

Machine is equipped with a Childproof Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On/Off/Cancel button
on the control panel are deactivated when the
Child-proof Lock is active.
In order to activate the Child Lock, press
Audio Warning and Child Lock button for 3
Dryer / User Manual
seconds.
To start a new programme after the current
T
ime
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the Child
Lock.
C
End Time
C
ƒ
ƒ
5.11 Changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. If you want to select Extra Dry programme
2. Select Extra Dry programme by turning
3. Press the Start/Pause button to start the
Lock symbol will appear on the
display when the Child-proof Lock is
activated.
Child Lock is deactivated when the
machine is switched off and on with
On/Off/Cancel button.
When the Child-proof Lock is activated:
Display symbols will not change even if
the position of Programme Selection knob
is changed while the machine is running
or in halt.
instead of Iron Dry programme, press
and hold the Start / Pause button for 1
second to stop the programme.
the Programme Selection knob.
program.
49 / 60 EN