Maintenance And Cleaning; Lint Filter / Loading Door Inner Surface - Grundig Edition 70 Bedienungsanleitung

7.Maintenance and
cleaning
Service life of the product extends
and frequently faced problems
decrease if cleaned at regular
intervals.
CAUTION: Unplug the
product from the mains
B
during any maintenance
and cleaning works (control
panel, body, etc.).
7.1 Lint Filter / Loading Door Inner
Surface
Lint and fiber released from the
laundry to the air during the drying
cycle are collected in the Lint Filter.
C
Such fiber and lint are
generally formed during
wearing and washing.
A
CAUTION: Always clean
the lint filter and the inner
surfaces of the loading
door after each drying
process.
C
You can clean the lint filter
housing with a vacuum
cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it
up and open the lint filter.
3. Clean lint, fiber, and cotton
raveling by hand or with a soft
piece of cloth.
4. Close the lint filter and place it
back into its housing.
28
C
A layer can build up on the
filter pores that can cause
clogging of the filter after
using the machine for a
while. Wash the lint filter
with warm water to remove
the layer that builds up on
the lint filter surface. Dry
the lint filter completely
before reinstalling it.
C
Clean the entire inner
surface of the loading door
and loading door gasket.