Changing The Programme After It Has Started; Adding / Removing Laundry In Pause Mode; Canceling The Programme - Grundig GTN 48261 GC Bedienungsanleitung

Operating the product
When the Child Lock is activated:
Display symbols will not change even if
ƒ
the position of Programme Selection knob
is changed while the machine is running
or in halt.
If the Child Lock is deactivated after
ƒ
changing the position of the Programme
Selection knob while the machine is
running, the machine stops and new
programme information is displayed.
5.13 Changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. For example, to select Extra Dry
programme instead of Iron Dry
programme, press the Start / Pause
button to stop the programme.
2. Select Extra Dry programme by turning
the Programme Selection knob.
3. Press Start/Pause button to start the
program.
Adding / removing laundry in Pause
mode
In order to add or take out laundry after the
drying programme has started:
1.Press Start / Pause button to switch the
machine to Pause mode. Drying process
will stop.
2.While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
3.Press Start/Pause button to start the
program.
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes
and the result will be wet laundry after
the drying process is over.
58 / 68 EN
C
You may repeat laundry adding
or removing process as many
times as you desire during drying.
However, this process will increase
the programme time and energy
consumption since the drying process
will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C
If you select a new programme by
turning the Programme Selection knob
while your machine is in Pause mode,
then the current program is aborted
and new programme information is
displayed.
CAUTION: Do not touch the inner
surface of the drum when adding or
taking out laundry while a programme
is running. Surfaces of the drum are
hot.

5.14 Canceling the programme

If you want to stop drying and cancel the
programme for any reason after the machine
has started to run, press and hold the
Off/Cancel
button for 3 seconds.
A
CAUTION: As the inside of the
machine will be excessively hot
when you cancel the program while
the machine is running, activate the
ventilation program to cool it down.
On/
Dryer / User Manuel