Caring For The Fi Ttings; Do Not Use; Anti-Slip Coating; (Optional) - HOESCH SensePerience Planungs-, Montage- Und Bedienungsanleitung

03.02 Caring for the fi ttings
For day-to-day cleaning, use neutral or citrus-based cleaning agents only. Use cleaning agents intended for cleaning fi ttings only. Follow
the instructions for the cleaning agent!
Spray cleaning agent onto a cloth and use it to clean the fi ttings.
Rinse the fi tting with plenty of water and polish with a soft cloth.

03.03 Do not use ...

■ Scouring or scraping cleaning textiles or sponges.
■ Cleaning agents with fl uid acids such as hydrochloric or citric acid.
■ Scouring agents.
■ Cleaning agents containing chlorine bleach lye.

03.04 Anti-slip coating

Attention! Do not grind the surface with anti-slip coating!
GB
04

Operating Instructions

WARNING: Children should not be allowed to use the
device without supervision, unless proper instructions
were given, to operate the device safely and the child
understands dangers of its incorrect use.
Initial start up
For initial start up professional installation is necessary based on
installation instructions required.

04.01 Control panel

Operation
(valid for the panel with a control panel)
Operating panel ON/OFF.
Keeping the button pressed for 3 seconds → switches off the operating panel, all the activated functions will be
switched off.
3
ON/OFF all back jets, massage time 20 minutes. Set the control knob to the corresponding position, see point 04.02
6
2 Bottom back jets, massage time 20 minutes. Set the control knob to the corresponding position, see point 04.02
7
ON/OFF head spray, duration 20 minutes. Set the control knob to the corresponding position, see point 04.02
8
ON/OFF Scottish massage. Set the control knob to the corresponding position, see point 04.02
Alternating hot and cold water. Hot water for 2 minutes, cold water for 5 seconds, hot water for 2 minutes, cold water for 5
seconds, hot water for 2 minutes. [W2] shows the remaining massage time.
2
ON/OFF steam bath + temperature selection.
temp.
The temperature (38, 40, 42, 44, 46, 48, 50°C) can be selected once the steam generator has been switched on.
[W1] indicates the selected temperature.
1
Steam bath readiness is indicated every 30 seconds by the halogen light fl ashing 3 times or by the white colour-light.
Sets the steam bath duration (10, 20, 30 minutes) / Switches off the steam generator. [W1] stops fl ashing once the target
temperature has been reached. After that the steam bath duration is selectable. You can extend the bath time during
steam bathing.
5
During steam bathing water massage functions are disabled.
The head spray (cold shower!) can be activated as long as the button is pressed while the steam function is running.
Lighting/Colour-Light Therapy
12

(Optional)

Durable, anti-slip coating applied on acrylic and
mineral cast surface. It ensures a maximum of safety
and bathing comfort. Aesthetic transparent patterns
with a gentle structure create new visual effects in the
bathroom. The anti-slip coating is smooth, which
allows for easy cleaning of the shower tray.
Showering is safe and more pleasant for the user.
W1
temp.
1 2 3
6 7 8
radio/MP3
11 12 13
W2
4 5
9 10
14 15