Replacing dust
container
1 Insert the hook at the bottom rear of the
dust pod into the tray on the
2 Rotate the dust pod towards the cleaner
body until it clicks into place.
Exhaust filter
After approximately 5 emptyings of the dust
container the exhaust filter should be cleaned.
1 Unclip the exhaust filter cover
N
the bottom tab.
2 Remove foam
filter.
3 Shake the filter vigorously to remove any
build of dust.
4 Refit exhaust filter cover by inserting top two
pegs then clip in the bottom tab.
Depending on usage, the exhaust filter
should be replaced approximately every 6
months.
Purchasing
replacement filters
M
body.
.
largely upon usage of the cleaner. Should the
dust filter become damaged or if there is a
noticeable drop in performance even after
washing, it should be changed immediately. Use
only Morphy Richards replacement filters which
can be purchased from specialist retailers or by
calling the number on the front page of this
leaflet.
È
by lifting
M
15
The lifetime of the dust filter is dependant
N