EIO Jolly Upright Bedienungsanleitung Seite 14

Using
Unwind the cable or turn the quick release
Î
lever and plug into a mains socket.
I
Switch on.
Dust disposal
Ensure the Pod is switched off and
disconnected from the mains supply.
1 Slide the pod release button up and pull the
dust pod away from the cleaner.
Note: When the floor nozzle is fitted the
cleaner must be tilted slightly backwards to
remove the dust pod.
2 Lift out the dust filter
3 Pull out the mesh filter.
4 Empty the dust into a bin.
5 Clean the filters as described in next
section.
6 Replace the mesh filter then the dust filter
into the pod.
J
K
L
I
J
Cleaning the mesh
and dust filters
IMPORTANT: Every time the pod is emptied,
clean the filters by shaking rigorously, or by
using the brush attachment.
To maintain high suction, the dust filter
should also be washed regularly in warm water,
but do not use detergent.
Allow the filter to dry naturally and ensure it
is totally dry before installing it back into the
cleaner.
A spare dust filter is provided to allow you to
continue using your vacuum whilst the original
filter is washed and dried.
14
‰
„
‰
K
L