Noise/Vibration Information; Technical Data - Bosch EasyAquatak 120 Orginal-Betriebsanleitung

OBJ_BUCH-2949-001.book Page 14 Monday, August 15, 2016 11:22 AM
14 | English
 Repairs may only be carried out by
authorised Bosch Service Centres.
Accessories and spare parts

Accessories and spare parts which
have been approved by Bosch must
be used. Original accessories and
spare parts guarantee that the unit
can be operated safety and without
any breakdowns.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Movement direction
Weight
On
Off
Lo Low pressure
Hi High pressure
Accessories
Intended Use
The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories and cleaning agents approved by Bosch are used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
This product should not be used for professional use.

Technical Data

Pressure washer
Article number
Rated power
Supply temperature max.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.153 ohm.
F 016 L81 613 | (15.8.16)
Pressure washer
Supply rate min.
Allowable pressure
Rated pressure
Rated Flow
Maximum inlet pressure
Autostop function
Weight according to EPTA-
Procedure 01:2014
Protection class
Serial number
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.153 ohm.

Noise/Vibration Information

Sound emission values determined according to
EN 60335-2-79.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80.5 dB(A); sound power level
90.8 dB(A). Uncertainty K=1.9 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60335-2-79:
a =1.7 m/s
h
Mounting and Operation
Action
Delivery Scope
Mounting cable bracket/in use storage
for gun
Connecting/disconnecting high pres-
sure gun to lance
Connecting/disconnecting nozzle
Connecting/disconnecting high pres-
sure water supply hose/nozzle
Connecting to the water supply
Switching On and Off
EasyAquatak 120
Adjust water jet
3 600 HA7 9..
Connect detergent bottle
kW 1.5
Clean nozzle
°C 40
Clean the water filter
Transport
Storage
Selecting Accessories
EasyAquatak 120
l/min
bar
MPa
l/min
MPa
kg
See serial number (rating
plate) on pressure washer.
(triax vector sum) and uncertainty K
h
2 2
, K=0.6 m/s .
Figure
1
2
3
3
4
5
6
7–8
9
10
11
12
12
13
Bosch Power Tools
5.9
12
8
5.4
1

4.7
/II
Page
245
245
246
246
247
247
248
249
250
250
251
251
252
253