Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OBJ_BUCH-1870-006.book Page 11 Wednesday, July 30, 2014 8:42 AM
Symbol
Meaning
Off
Lo
Low pressure
Hi
High pressure
Accessories
Intended Use
The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories such as cleaning agents approved by Bosch are
used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
This product should not be used for professional use.
Technical Data
Pressure washer
Article number
Rated power
Supply Temperature max.
Supply rate min.
Allowable pressure
Rated pressure
Flow rate
Maximum inlet pressure
Autostop function
Weight according to
EPTA-Procedure 01/2003
Protection class
Serial number
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0,153 ohm.
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-79.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); sound power level 95 dB(A).
Uncertainty K =1 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60335:
2
2
a
=6 m/s
, K=2 m/s
.
h
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
Bosch Power Tools
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 60335-2-79.
2000/14/EC: Guaranteed sound power level 97 dB(A). Con-
formity assessment procedure according to Annex V.
Equipment category: 27
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
28.06.2014
AQT 33-10
Mounting and Operation
3 600 HA7 0..
Action
kW
1.3
Delivery Scope
°C
40
Mounting the hose holder
l/min
5.5
Connecting high pressure gun to lance
bar
10
Connecting high pressure water supply
MPa
6.7
hose/nozzle
l/min
4.5
Tube Assembly
MPa
1
Water connection
Switching On and Off
Adjust water jet
kg
5.8
Connect detergent bottle
/II
Clean the water filter
See serial number (rating
Clean nozzle
plate) on pressure washer.
Storage
Transport
Selecting Accessories
Starting
For Your Safety
The operating voltage is 230 V AC, 50 Hz (for non-EU coun-
tries 220 V, 240 V as applicable). Only use approved exten-
sion cables. Contact your Bosch Service Centre for details.
If you want to use an extension cable when operating your
high pressure washer, only the following cable dimensions
should be used:
- 1.5 mm
- 2.5 mm
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
2
– max length 20 m
2
– max length 50 m
F 016 L70 993 | (30.7.14)
English | 11
Figure Page
1
193
2
194
3
194
4
195
5
195
6
196
7
196
8
197
9
197
10
198
11
198
12
199
13
199
14
200
Werbung
Inhaltsverzeichnis
