Bosch EasyAquatak 120 Orginal-Betriebsanleitung Seite 12

OBJ_BUCH-2949-001.book Page 12 Monday, August 15, 2016 11:22 AM
12 | English
 Make sure that the supply hose is at
least 12.7 mm (1/2") in diameter and
is reinforced.
 The appliance should never be used
on the drinking water supply without
a back flow valve. Water which has
passed the back flow valve is regard-
ed as undrinkable.

The high-pressure hose must not be
damaged (danger of bursting). A
damaged high-pressure hose must be
replaced immediately. Only use hos-
es and connections recommended by
the manufacturer.
 High-pressure hoses, fittings and
couplings are important for the safety
of the appliance. Use only hoses, fit-
tings and couplings recommended by
the manufacturer.
 Only clean or filtered water should be
used for intake.
Application
 Before use, check that the unit and
operating equipment are in perfect
condition and are safe to operate. Do
not use the unit if it is not in perfect
condition.

Do not direct the jet against yourself
or others in order to clean clothes or
footwear.

Do not use solvent-containing liq-
uids, undiluted acids, acetone or sol-
vents! This includes petrol, paint thin-
ners, heating oil. The sprayed vapour
is highly flammable, explosive and
toxic.
 The appropriate safety regulations
must be observed when using the unit
in dangerous areas (e. g. petrol sta-
F 016 L81 613 | (15.8.16)
tions). It is forbidden to operate the
unit in potentially explosive locations.
 The unit must be placed on a solid
base.
 Take care if using the machine in a
confined space ensuring that there is
adequate ventilation. Ensure that all
vehicles are switched off at all times
whilst cleaning.
 Operation of this machine requires
both hands to be used at all times. Do
not operate from a ladder. Take care
when using the machine on balconies
or other raised areas ensuring that
you can see any edges at all times.
 Only use detergents recommended
by the manufacturer. Comply with
the application, disposal and warning
instructions of the detergent manu-
facturers.
 All current-conducting components
in the working area must be protect-
ed against splashed water.
 The gun trigger must not be jammed
in position "ON" during operation.
 Wear suitable protective clothing to
protect against splash water. Do not
use the machine in reach of persons,
unless these are also wearing protec-
tive clothing.
 If necessary wear personal protective
equipment (PPE) e. g. safety goggles,
breathing protection etc to protect
against water, particles and/or aero-
sols sprayed back from parts.
 High pressure may cause objects to
rebound. If necessary wear suitable
personnel protective equipment such
as safety goggles.
Bosch Power Tools