• Suitable for 6 V (3 cells) and 12 V (6 cells) lead-acid, lead-gel, lead-fleece
(AGM), calcium and pure lead vehicle batteries
• Battery test function
• Desulphation function* for sulphated batteries
• Regeneration function* for deeply discharged batteries
• Trickle charging function and overcharge protection
• Reverse polarity protected, short-circuit-proof and spark-proof
• Operating voltage: 220 - 240 V/AC (50/60 Hz)
*depending on the degree of sulphation or deep discharge
5. Set comprises
• ProCharger 1000 charger
• Ring terminal cable
6. Intended use
This charger is designed exclusively for charging lead-acid, lead-gel, lead-fleece
(AGM), calcium or pure-lead vehicle batteries with a nominal voltage of 6 V or
12 V. The recommended battery capacity is 1.2 Ah to 40 Ah. It is not suitable for
charging non-rechargeable batteries (e.g. zinc-carbon, alkali etc.) or other types of
rechargeable battery (e.g. NiMh, Li-Ion) not indicated above. The charger must only
be operated with common domestic AC voltages of 220 - 240 V/AC (50/60 Hz). For
reasons of both safety and official approval (CE), you must not convert and/or modify
the product.
7. Warnings and safety instructions
Please read these operating instructions through carefully, as they contain important
information on how to operate and use this charger. The operating instructions are an
integral part of the device and must therefore be kept safe. The charger must only be
passed on to third parties together with the operating instructions.
26
• Charging clamp cable
• Operating instructions