Switching Off; Cleaning And Maintenance - Rommelsbacher SWG 700 Bedienungsanleitung

Switching off

• Tilt the ON/OFF switch to "0" position for switching-off. The pilot lamp (A) "red" on the left-hand side
goes out.
• Clean the appliance and the exchangeable plates after each usage thoroughly.
• Unplug after each use to ensure the appliance is switched off safely!

Cleaning and maintenance

• Before cleaning, always unplug the appliance and let all
parts cool down!
• Do not immerse appliance, power cord and plug in water
nor clean it under running water!
NOTE: Do not put the exchangeable plates in your dishwasher since the dishwasher salt can damage the
non-stick coating.
• After the appliance is cooled down, wipe the casing, the inner surfaces of the appliance and both
heating elements with a damp, soft cloth. Then, wipe it again with a dry cloth.
• Make sure no water or steam can infiltrate the appliance from below.
• Clean the exchangeable plates in warm water with some dishwashing detergent.
TIP: Wrap plates with accumulated dirt in wet paper towels and allow to soak for some time. The dirt can be
removed then with a soft brush.
• Do not use abrasives or dissolvents or sharp/pointed objects!
• Do not use steel wool or scouring pads!
• Never use oven sprays!
• Never use a steam jet appliance for cleaning the appliance and the accessories!
21