Declaration Of Conformity - Dialogic Diva BRI-2FX Installationshandbuch

The equipment described below is declared to be in conformity with the following applicable national and international
conformity is valid ONLY when the equipment is used in a manner consistent with the manufacturer's recommendations and the
reference documents.
Equipment Type(s): Diva BRI-2FX
Document No / Edition /Date Title
IEC 60950 – 3 Edition (1999) Safety of Information Technology Equipment
EN 60950-1: 2001 Safety of Information Technology Equipment
FCC, 47 CFR Part 15, Class B digital device Radio Frequency Devices - Subpart B - Unintentional Radiators
ICES-003 Issue 4 - Feb 2004, Class B Interference-Causing Equipment Standards - Digital Apparatus
EN 55022: 1998, Class B Limit Information Technology Equipment - Radio Disturbance Characteristics
EN 55024: 1998 Information Technology Equipment - Immunity Characteristics
47 CFR part 68, TIA/EIA/IS-968 Technical Requirements for Connection of Terminal Equipment to the Telephone Network
CS-03 Issue 8 Part VI Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements
TBR3: Nov 95, A1: Dec 97 Attachment requirements for terminal equipment to connect to a ISDN using ISDN basic access
AS/NZS 60950: 2000, A1: 2003 Safety of Information Technology Equipment
AS/ACIF S031: 2001 Requirements for ISDN Basic Access Interface
Additional information:
Australia test reports: Futjisu/Siemens report # CER+EIC01-0005+E01, dated 28/06/2001 covers EN55022
Nemko report # 6S65295AU1, dated 29/06/2006 covers AS/NZS 60950
Eicon internal report, dated 16/11/2001 and TBR3 layer 1, 2, 3 report # 01/02530/1/Z from Deutsche Telekom AG,
dated 31/05/2001 covers AS/ACIF S031
Regions:
European Economic Area (EEA): Dialogic Corporation (address below) declares the equipment in compliance with the essential requirements of EC Council
Directives: 1999/5/EC - R&TTE: 2006/95/EC - Safety/LVD: 89/336/EEC – EMC
USA: Dialogic Corporation (address below) make this SDoC as Responsible Party for equipment registered with ACTA as number: Reg. no: E3SCAN-40181-XD-N
Canada: Dialogic Corporation (address below) is the Declaring Party for equipment registered with Industry Canada as number: IC: 885E-803007
Australia / New Zealand: Supplier Code N964 [Dialogic
Any other region where the Regulatory Requirements are satisfied by compliance to the standards declared above.
Dialogic Corporation
This Declaration of Conformity is issued by
Company Address:
Dialogic Corporation
th
9800 Cavendish 5 floor
Montreal, Quebec
Canada, H4M 2V9
Dialogic Distribution Limited, our location in Europe operates from:
Unit 4034 Kingswood Avenue Citywest Business Campus, Saggart, Co. Dublin, Ireland.
Copies of this Declaration of Conformity may be downloaded at
Dialogic® Diva® Media Board Installation Guide

Declaration of Conformity

Pty Ltd.
Level 12, 1 Pacific Highway North Sydney NSW 2060] ACN: 064 824 899
, which is solely responsible for the declared compliance.
Authorized signature, name and function:
Gaetan Hogue - Appro als Manager
Date: 25, January, 2007
http://www.dialogic.com/declarations
No: D0013
Revision 01
standards. The
v
page 69