Dialogic Diva BRI-2FX Installationshandbuch Seite 17

WARNING Dialogic
FS and V-8PRI PCIe FS Media Boards
Diva V-2PRI PCI and V-4PRI PCI Media Boards may need
approximately 20 Watts of power.
Diva V-4PRI PCIe FS and V-8PRI PCIe FS Media Boards may
need approximately 24 Watts of power.
If you have installed several of these Diva Media Boards in
your system, make sure that the power supply will not be
overloaded when you install your Diva Media Board, to avoid
personal injuries and damage to your computer, your Diva
Media Board, or both.
Make also sure that your PC provides sufficient cooling to avoid
damage on your Diva Media Board.
IMPORTANT Dialogic
The Diva BRI and PRI Media Boards have been tested and
found to comply with the Electromagnetic compatibility,
Safety, and Network connection regulations within the
European Union, North America, and other major territories.
Read the regulatory information in
Information
Media Board.
Cables for PRI interface ports shall be shielded.
Dialogic
Media Boards
Diva PRI PCIe, V-xPRI PCI, and V-xPRI PCIe Media Boards
should only be operated within the permitted temperature
range - see page 44 for more information. If the temperature
is exceeded, a trace file with the temperature information will
be created.
Dialogic
Use only certified telecommunications cables with No. 26 AWG
(American Wire Gauge) or higher with this equipment to
ensure proper functioning of the Diva Media Board.
Dialogic® Diva® Media Board Installation Guide
® ®
Diva V-2PRI PCI, V-4PRI PCI, V-4PRI PCIe
® ®
Diva BRI and PRI Media Boards
on page 54 before installing and using your Diva
® ®
Diva PRI PCIe, V-xPRI PCI, and V-xPRI PCIe
® ®
Diva Analog Media Boards
International Regulatory
page 17