Dialogic ® Diva ® Bri And Diva Um-Bri Media Boards - Dialogic Diva BRI-2FX Installationshandbuch

Checking the status LEDs
®
The Dialogic Diva
that indicate a specific status of the Diva Media Board.
® ®
Dialogic Diva
The Diva BRI-CTI, Diva BRI-2FX, Diva BRI-2, Diva UM-BRI-2, Diva 4BRI-8,
and Diva UM-4BRI-8 Media Boards have two LEDs for each port:
Diva BRI-CTI
Diva BRI-2FX
Diva UM-BRI-2
Diva BRI-2
green
orange
The table below describes the function of the LEDs:
Color Status
green off
lit
orange off
lit
Dialogic® Diva® Media Board Installation Guide
®
BRI and PRI Media Boards have two or four status LEDs
BRI and Diva UM-BRI Media Boards
Layer 1 is not active.
Layer 1 is active. The cabling and the connection to the ISDN work
properly.
Layer 2 is not active.
Layer 2, i.e., the D-channel, is active. In Europe, the status of the
D-channel depends on the switch configuration; the LED might
remain lit for the duration of the call or it might remain lit
continuously. In North America, the D-channel is always active
and, as such, the LED remains lit.
Diva UM-4BRI-8
Diva 4BRI-8
Description
green
orange
page 39