Before You Start - Dialogic Diva BRI-2FX Installationshandbuch

Before You Start

Before You Start
Before you start, make sure you have the items you need to install your
® ®
Dialogic Diva Media Board and the corresponding software.
Item
Computer
® ®
Dialogic Diva ISDN
Media Board package
® ®
Dialogic Diva Analog
Media Board package
Cables
CSU/DSU
page 22
Your computer must have:
• a free PCI slot for PCI bus boards
® ®
(for Dialogic Diva
according to PCI 2.2)
• a free PCIe x1 or x4 slot, 1.0a compliant for PCIe bus
boards. Other slot sizes, e.g., x8, x16 can be used if
supported by the BIOS and the operating system.
Note: The x4 slot is only necessary for Dialogic
V-4PRI PCIe FS and V-8PRI PCIe FS Media Boards
• an installed operating system:
Linux,
® ®
Microsoft Windows
®
Microsoft Windows Server
®
Microsoft Windows Vista
®
Microsoft Windows Server
® ®
Microsoft Windows
• at least 15 MB of free hard-disk space for the software
This includes:
® ®
• Dialogic Diva ISDN Media Board
• Diva BRI Media Boards only: cable(s) needed to connect
to your ISDN line
® ®
• Dialogic Diva V-8PRI PCIe FS Media Board: four cables
with dongle
® ®
• Dialogic Diva Media Board Installation Guide
This includes:
• Diva Analog Media Board
• cables to connect to your analog line
® ®
• Dialogic Diva Analog-8 Media Boards: four cables with
dongle
• Diva Media Board Installation Guide
® ®
For Dialogic Diva PRI Media Boards, the RJ45 cables are
not part of the package and need to be ordered from an
independent distributor.
® ®
Dialogic Diva V-1PRI PCIe HS, V-2PRI PCIe HS, V-4PRI
PCIe HS, V-4PRI PCIe FS, and V-8PRI PCIe FS Media Boards
do not supply the function of the CSU or DSU internally. You
need to purchase it from an independent distributor and
connect it externally. See
Media Board on page 28 for more information.
Description
V-2PRI und V-4PRI Media Boards
7
®
2008,
®,
®
2003,
XP
Connect your Dialogic® Diva® PRI
® ®
Diva