Dialogic Diva BRI-2FX Installationshandbuch Seite 26

Installation
1. Take the cable included with
the Diva Media Board and plug one
end into the board.
Diva BRI
Media Board
2. Plug the other end into
the S/T jack.
Note for Dialogic
The Diva 4BRI Media Boards have four ports for connecting to four separate
ISDN BRI lines. Connect all four cables as described above. You can use any
port; typically, you must specify the port number during software
configuration. The port numbers are shown below. The diagram is oriented
with the edge connector pointing downwards.
page 26
3. Take the cable included with the NT1
and plug one end into the ISDN wall
jack.
NT1
U jack
S/T jack
4. Plug the other end into
the U jack.
® ®
Diva 4BRI Media Boards:
Port 1
Port 2
Port 3
Port 4