Dialogic Diva BRI-2FX Installationshandbuch Seite 29

Any Diva PRI Media Board, except the Diva V-8PRI Media Board:
Connect any Diva PRI Media Board, except the Diva V-8PRI Media Board as
shown in this graphic:
1. Take the cable and plug one end into
the board.
Diva PRI
Media Board
®
Note for Dialogic
Diva V-2PRI PCI Media Boards have two ports and Diva V-4PRI PCI Media
Boards have four ports for connecting to two or four separate ISDN PRI, E1,
or T1 lines. Connect all two or four cables as described above. You can use
any port; typically, you must specify the port number during software
configuration. The port numbers are shown below. The diagram is oriented
with the edge connector pointing downwards.
Diva V-2PRI Media Board
Port 1
Port 2
Dialogic® Diva® Media Board Installation Guide
®
Diva V-2PRI PCI and V-4PRI PCI Media Boards:
Diva V-4PRI Media Board
ISDN wall jack, or CSU
2. Plug the other end into the
wall jack or the CSU.
Port 1
Port 2
Port 3
Port 4
page 29