Dialogic Diva BRI-2FX Installationshandbuch Seite 41

® ®
Dialogic Diva
Diva V-xPRI PCI Media Boards have two multifunctional LEDs for each port:
Diva V-2PRI
green or yellow
blue or red
The table below describes the function of each LED:
Color Status
green off Layer 2 is not active. Check your layer 2 configuration, i.e., switch
type, switch etc.
lit Layer 2 is active. If your Dialogic
properly, layer 2 is always active.
yellow off Normal operation.
lit Remote site is experiencing synchronization problems (if a remote
alarm/yellow alarm is detected).
red off Normal operation.
lit The receiver does not detect a signal (loss of signal/red alarm).
blue off Normal operation.
lit Received frames are not synchronized properly (alarm indication
signal/blue alarm).
Dialogic® Diva® Media Board Installation Guide
V-2PRI and V-4PRI Media Boards
Diva V-4PRI
green or yellow
blue or red
Description
® ®
Diva Media Board works
page 41