Ltttrigger_Setreactivationtime - LTT -184-8ch Referenzhandbuch

LTTTrigger_SetReactivationTime

Declaration:
long __stdcall LTTTrigger_SetReactivationTime(
unsigned long dwTime
);
Description:
Sets reactivation time for Trigger. Typical dead-time for reactivation <5μs.
Units are in [ns]. The timer resolution is in steps of 100ns. The valid range
depends on the used sample time:
CAUTION:
This option can't be actived together with LTTTrigger_Setpretrigger!!
Both are mutualy exclusive.
Input:
dwTime
reactivation time in [ns]
Return:
0 OK
-1 No trigger active
-2 Reactivation time too big
Beschreibung der DLL LTT2API
0
4 * Sampletime...1s - Valid reactivation time
- Reactivation timer OFF
50
[]
Handbuch Version 3.11