Ltttrigger - LTT -184-8ch Referenzhandbuch

LTTTrigger

Declaration:
long __stdcall
unsigned short Trigger,
unsigned short Slope,
unsigned short Channel,
unsigned short ChType,
unsigned short TrigType,
long x1,
long x2
);
Description:
Enables or disables the trigger channel and sets trigger parameters.
CAUTION:
The channels which will be used as trigger channels must be turned on!
Input:
Trig
0 - trigger OFF
1 - trigger ON
Slope
Level, Comparison + Delta:
Comparison:
Region:
Channel
set trigger channel (index begins with 0)
ChType
0 - analog channel
1 - digital channel
TrigType
analog
0 – Level
1 – Comparison
2 - Region
Beschreibung der DLL LTT2API
LTT Trigger(
0 - positive slope
1 - negative slope
0 - bigger then threshold
1 - smaller then threshold
0 - enter region
1 - exit region
firmware 6xxx
x1 - digital trigger bit [ 8..15]
firmware 7xxx
x1 - digital trigger bit [10..15]
CAUTION:
only the specified bits are allowed !!!
digital
0 - single bit mode
1 - multi bit mode
47
[]
Handbuch Version 3.11