Busch-Jaeger 6411 U-101 Betriebsanleitung Seite 59

Modes of operation
"Central" (Z)
● Application example: A shutter control flush-mounted
insert is used as a central control unit for other
shutters.
● Any actuation (short or long) of this central control unit
is interpreted as a motion command (3 minutes) and
put into effect. In this way,r it is ensured that all
subordinate shutters move to the end position.
● Programmed down motion times are carried out for the
extension units.
Programming (P)
● Application example: A move down command
automatically moves the shutter downwards to a
specified position and adjusts the louvres.
● After change-over to another mode of operation, the
programmed motion time is only active if the shutter
was moved upwards beforehand by a motion
command (3 minutes) - only in this manner is it
ensured that the desired position is approached.
ENG 59