Modes of operation
●
If the operating area is pressed continuously, the
shutter moves up/down – timed - as long as this is
done. If this is done for more than three minutes, the
flush-type insert is switched off.
Sun-shutter function (M)
●
This operating mode open is only available for version
6411U/S-101 if a sun sensor is connected.
●
The function is available with brightness sensor 6414.
●
It has no effect without sun sensor or in the U-version
(identical to normal operation).
●
If the set brightness value is exceeded when this
operating mode is activated, the shutter moves down
for 3 min or a previously programmed motion time is
carried out (and - if programmed – a return pulse).
●
If the brightness value is no longer reached, the shutter
is only moved back up again automatically if the
operation time ensures that the sun is "in sight" of the
sun sensor.
ENG
58