Menu Structure And Settings; Menu Tree - WIKA CTH6300 Betriebsanleitung

6. Commissioning, operation
For all measuring instruments the measuring channels can be selected
according to the model-specific measurement parameters. For the version
with only one probe the correct measurement parameter is already set.
EN
When using measuring instruments with several channels and/or different
probes make sure that the correct measurement parameter is set. See
chapter 6.4.2 "Probe selection Prob".

6.3 Menu structure and settings

Instrument settings such as measurement parameters, probe calibration, channel
deactivation, arrow keys, etc. are adjusted using a menu tree.
To open the main menu, press the ENTER/MENU key.
■
The ▲▼ arrow keys are used to select the desired menu items.
■
By pressing ESC, one returns to the measuring mode.
■

6.4 Menu tree

Unit
°C
°F
m/s
%rh
g/m³
°C td
°F td
Pa
hPa
m³/s
22
Prob Lin2
P T1-T2
J
K
L
N
R
S
T
RH
D
Pr
H
WIKA operating instructions, models CTH6300 and CTH6500
CAL Chnl
OFF OFF
oP1 ON
oP2
ArEA Lo6
c OFF
m ON