Accessory Connector; Mating Connector M8 Straight Inclusive Cable; Straight Mating Connector M8 - Siko Ap24 Originalmontageanleitung

AP24

Accessory connector

7 Accessory connector
(not included in the scope of delivery)

7.1 Mating connector M8 straight inclusive cable

• Accessory SIKO art. no. "KV04S1" (pin/female 4 pin Bus-In/Bus-Out).

7.2 Straight mating connector M8

Advice
NOTICE
` Strand cross sections of lines ≥0.14 ... ≤0.25 mm² / cable feed-
• Accessory SIKO art. no. "84209" (female 4 pin Bus-In).
• Accessory SIKO art. no. "84210" (pin 4 pin bus Bus-Out).
Mounting
1. Slide parts
2. Strip the cable.
3. Shorten, expand the shielding and lay around the shielding ring
4. Run strands through coupling sleeve
5. Mount parts
6. Thread insulating sleeve
7. Screw coupling sleeve
Fig. 6: Straight mating connector M8
AP24 · Date 12.05.2015 · Art. No. 85833 · Mod. status 171/15
through: ø3.5 ... ø5 mm.
(Fig. 6)
... over cable sheath.
1 4
2 ... 4
sleeve.
1 .



and strip them.
5
. Turn pressure screw
6 , solder strands and mount insulating
5 with element 7




English
1 to secure the cable.
and tighten pressure screw
23
4 .