Commissioning; Transport, Storage, Maintenance And Disposal - Siko Ap24 Originalmontageanleitung

AP24
22

Commissioning

NOTICE
Admissible power input
Supply for the remote display shall be sized sufficiently. Current draw is
temporarily higher than nominal current at the moment of switching on.
For the supply value refer to the technical data in chapter 8.
5 Commissioning
For commissioning refer to the relevant software description.

6 Transport, Storage, Maintenance and Disposal

Transport and storage
Handle, transport and store remote displays with care. Pay attention to
the following points:
• Transport and / or store remote displays in the unopened original
packaging.
• Protect remote displays from harmful physical influences including
dust, heat and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the remote display for transport damages.
Do not install damaged remote displays.
Maintenance
With correct installation according to chapter
res no maintenance.
Disposal
The remote display's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at
the same time. Therefore, the remote display must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
AP24 · Date 12.05.2015 · Art. No. 85833 · Mod. status 171/15
English
4 the remote display requi-