Acoustic Signals; Options - Electrolux GA60KVSW Benutzerinformation

10 www.electrolux.com
2. Press
• The indicators
• The indicator
• The display shows the current
3. Press
rinse aid dispenser deactivated.
The rinse aid indicator goes off.
4. Press the on/off button to confirm the
setting.
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
2. Press and hold
indicator comes on with fixed light.
How to set the MyFavourite
programme
Press
• The indicators that are related to

7. OPTIONS

.
,
off.
continues to flash.
setting: = rinse aid dispenser
activated.
to change the setting.
until the related
.
the MyFavourite programme and
options come on.
Desired options must be
activated every time before
you start a programme
(except for Multitab). It is not
possible to activate or
deactivate options while a
programme is running.
and go

6.6 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
=
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm the
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt.
The salt indicator does not come on.
With the use of this option the programme
duration is prolonged to increase the
• The display shows the number and
the duration of the programme.
hold simultaneously
the indicators ,
to flash and the display is blank.
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting: = Acoustic signal off.
to change the setting.
= Acoustic signal on.
setting.
and until
, and start
, and go
continues to