Cleaning And Care - Hama HOME L410 Bedienungsanleitung

g

5. Cleaning and Care

DANGER
Danger of death due to electrical current
Remove the mains plug from the electrical socket before
cleaning the device.
WARNING
Risk of burns on the housing!
Observe the following safety precautions to avoid any injuries:
Do not touch the housing.
CAUTION!
Moisture can damage the device!
To prevent irreparable damage, make sure that no moisture gets
into the device when you clean it.
The rollers in the laminating device need to be cleaned regularly to
remove dirt and any adhesive residue. To do so, proceed as follows:
Switch on the device as previously described.
Set the temperature selector (5) to "80mic".
When the ready light (6) remains illuminated, insert a piece of pa-
per into the device.
If a lot of dirt sticks to the paper, turn over the paper and repeat
the process.
Clean the outside of the device with a dry cloth. You can lightly dampen
the cloth if the device is very dirty.
10
Home L410