Setting The Display Brightness Manually; Setting Alternative Display; Cleaning; Safety Instructions - Silvercrest SKRD 30 A1 Bedienungsanleitung

Setting the display brightness manually

GB
IE

Setting alternative display

Cleaning

Safety instructions

Cleaning the housing

22
Handling and operation/Cleaning
♦ Press and hold down the Dimmer/AOT
The current setting for the display brightness is shown ( = bright or = dim).
♦ Press and hold down the Dimmer/AOT
to change the setting.
NOTICE
► With the setting the display
soon as any button is pressed. With the setting the display
permanently.
Prerequisite: The device is in the radio operational mode.
♦ Press the Alarm1 button
5 seconds the indication in the display
frequency of the set radio station and the time of day.
♦ Press the Alarm1 button
radio station will again be displayed permanently.
♦ Press the Alarm2 button
♦ Press the Alarm2 button
radio station will again be displayed permanently.
DANGER
Life-threatening situation from electric shock!
► Remove the plug from the mains power socket before cleaning.
IMPORTANT
Damaging of the device!
► Make sure when you are cleaning the device that no moisture gets inside
in order to avoid irreparable damage to it.
■ Clean the surfaces of the device with a soft, dry cloth.
button for at least 2 seconds.
5
button again for at least 2 seconds
5
lights up for approx. 15 seconds as
3
. The current time of day is shown. Now every
8
alternates between the reception
3
again and the reception frequency of the set
8
. The current time of day is shown permanently.
9
again and the reception frequency of the set
9
lights up
3
SKRD 30 A1